|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 piece|
|Packaging Details:||Carton packaging|
|Delivery Time:||3-7 work day|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Supply Ability:||20000 pieces/month|
|Product Name:||LED Light Yuan Leak Protector||UC:||275V|
LED lamp protector, two way switch protector, anti glare, prevent strobe and prevent surge
This product is a full range of power supply protection products designed by our company for LED outdoor lighting system. This product can be installed in the lampshade of LED lamps or in the control cabinet. It is applied to many outdoor lighting systems such as LED street lamp, tunnel lamp, outdoor landscape lamp and so on. Different versions of the design are mainly to meet the different lines, divided into line connection and terminal connection two wiring ways, some versions also equipped with signal (DALI, RS485, 0-10V) protection function, mainly to meet the monitoring and regulation function of the LED lighting system.
Working principle of product
When the surge protector has no voltage, the impedance is very high, which means that the circuit breaker is open. When the voltage occurs, the impedance drops to a few Europe, and the surge current will flow through the surge protector and will not enter the device. At the same time, because the surge protector has a small impedance at this time, the voltage on both sides of the surge is relatively small, and because he is in parallel with the protected equipment, it prevents the equipment from suffering from large surge power. Pressure, so as to play the effect of discharge and pressure limiting.
1. instantaneous lightning protection, high endurance
2. compact structure, small size, easy to install
3. band failure protection, temperature protection, optional remote communication mode, with LED working instructions.
|Rated Operating Voitage||UC||275|
|Voltage protective level||Up(KV)≤||0.8|
|Max discharge current||Imax(KA)||6|
Nominal discharge current
|Sea level elevation≤3km|
|Remarks||Other max continuous operating voltage can be customized|
Use of attention
1. installation personnel need corresponding construction qualification. N and L line cannot be reversed.
2. after the connection is completed, check the wiring correctly and link reliability again, then switch on the power, and then put into operation.
3. lightning protector must be disconnected when installing and maintaining, and no live operation is strictly prohibited. Y is to prevent electric shock.
Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.
Product packaging:Carton packing
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
Contact Person: William